Quick Jump Menu
Info Ask a Question
Advanced Search Search the Knowledgebase
Fuel Flow Sensor (plastic) K-factors and Jet Sizes
Author: Matt Liknaitzky Reference Number: AA-00207 Views: 18865 Created: 2012-06-27 18:26 Last Updated: 2012-07-03 18:26 0 Rating/ Voters

Please see the attached table for K-factors and Jet Sizes for the plastic Fuel Flow Sensor:

Fuel Flow Sensor Jet Sizes l/Gal
Flow Rates 3.785
l/Min Gal/hr
Min Max Min Max K-Factor
Jet (803) 1mm  0.05 0.5 0.8 7.9 17000
Jet (815) 2mm  0.10 1.5 1.6 23.8 7000 Recommended for Rotax
Jet (845) 3mm  0.15 4.5 2.4 71.3 3500 Recommended for Jabiru
Jet (865) 4mm 0.18 6.5 2.9 103.0 2100
No Jet (810)  0.20 10.0 3.2 158.5 1420

3mm Jet is the smallest recommended for gravity-fed engines

 

 

 

 

 

Important Note: Jet needs to be installed ALL THE WAY into the intake for flow sensor to ready accurately.



IMPORTANT NOTICE: You must make your own determination if the products sold by MGL Avionics are safe and effective for your intended applications. MGL Avionics makes no representations or warranties as to either the suitability of any of the products we sell as to your particular application or the compatibility of any of the products we sell with other products you may buy from us or anywhere else, and we disclaim any warranties or representations that may otherwise arise by law. Also, we offer no specific advice on how to install any of the products we sell other than passing along anything that may have been provided to us by the manufacturer or other users. If you are in need of further information or guidance, please turn to the manufacturer, FAA Advisory Circulars and guidance materials, the Experimental Aircraft Association, or other reputable sources.