Quick Jump Menu
Info Ask a Question
Advanced Search Search the Knowledgebase
iEFIS Harness Wiring Schematics
Author: Matt Liknaitzky Reference Number: AA-00354 Views: 20005 Created: 2012-10-07 18:38 Last Updated: 2016-07-11 11:00 75 Rating/ 2 Voters

Attached are iEFIS / iBox CAN bus harness schematics that detail connecting up the system. The iBox is connected to all devices, such as the AHRS SP-7 and SP-6, the autopilot servos, the RDAC XF, etc., via the CAN bus. There are 2 CAN buses per iBox and each CAN bus extends to devices in a daisy chain as in the diagram below. The daisy chain is terminated on each end with terminating resistors. The harnesses sold by MGL Avionics include these resistors.


iBox Can Buss Harness Kit (Final).pdf 18 Kb Download File
MGL Can Buss Harness - daisy chain with iBox, iEFIS.pdf 18.5 Kb Download File
Misc MGL Can Buss Harness (Rev 2).pdf 14.7 Kb Download File

IMPORTANT NOTICE: You must make your own determination if the products sold by MGL Avionics are safe and effective for your intended applications. MGL Avionics makes no representations or warranties as to either the suitability of any of the products we sell as to your particular application or the compatibility of any of the products we sell with other products you may buy from us or anywhere else, and we disclaim any warranties or representations that may otherwise arise by law. Also, we offer no specific advice on how to install any of the products we sell other than passing along anything that may have been provided to us by the manufacturer or other users. If you are in need of further information or guidance, please turn to the manufacturer, FAA Advisory Circulars and guidance materials, the Experimental Aircraft Association, or other reputable sources.