Quick Jump Menu
Info Ask a Question
Advanced Search Search the Knowledgebase
Trig TT21 / TT22 Remote Mode-S Transponder Connection Manual
Author: Matt Liknaitzky Reference Number: AA-00629 Views: 96582 Created: 2014-09-11 12:33 Last Updated: 2014-09-11 12:39 0 Rating/ Voters

Attached is the manual for connecting the Trig Remote Mode-S Transponder to the MGL Avionics Odyssey/Voyager and iEFIS systems.

This solution provides a simple-to-use interface for a Trig Avionics TT21 or TT22 transponder. MGL Avionics have an interface that simply plugs into the rear of the transponder and typically only 4 wires have to be connected:

2 x CAN bus wires, power and ground. An optional suppression line is also provided should that be needed.

Please note that this interface does not work with the similar looking Dynon transponder. It is designed to be operated with the Trig transponder.



Attachments
MGL Avionics Trig Transponder Interface.pdf 0.2 Mb Download File

IMPORTANT NOTICE: You must make your own determination if the products sold by MGL Avionics are safe and effective for your intended applications. MGL Avionics makes no representations or warranties as to either the suitability of any of the products we sell as to your particular application or the compatibility of any of the products we sell with other products you may buy from us or anywhere else, and we disclaim any warranties or representations that may otherwise arise by law. Also, we offer no specific advice on how to install any of the products we sell other than passing along anything that may have been provided to us by the manufacturer or other users. If you are in need of further information or guidance, please turn to the manufacturer, FAA Advisory Circulars and guidance materials, the Experimental Aircraft Association, or other reputable sources.