Quick Jump Menu
Info Ask a Question
Advanced Search Search the Knowledgebase
Harness Schematic for Sandia STX-165R and uAvionix EchoUAT ADS-B
Author: Matt Liknaitzky Reference Number: AA-01956 Views: 766 Created: 2017-08-07 11:40 Last Updated: 2017-08-07 12:10 0 Rating/ Voters

Attached is the schematic for connecting both the uAvionix EchoUAT ADS-B and the Sandia STX-165R Remote Mode C Transponder.

The RS-232 wires from the STX-165R can be connected to any channel on the iBox or any channel on the iEFIS Lite or iEFIS Extender.

The RS-232 wire from the EchoUAT (ADS-B TX) must be connected to a high speed RS-232 RX channel (either channel 1 or channel 2 on the iBox or ANY RS-232 channel on the iEFIS Lite or iEFIS Extender).

Read this article for setup instructions.


Attachments
STX-165R, EchoUAT Schematic.pdf 19.8 Kb Download File

IMPORTANT NOTICE: You must make your own determination if the products sold by MGL Avionics are safe and effective for your intended applications. MGL Avionics makes no representations or warranties as to either the suitability of any of the products we sell as to your particular application or the compatibility of any of the products we sell with other products you may buy from us or anywhere else, and we disclaim any warranties or representations that may otherwise arise by law. Also, we offer no specific advice on how to install any of the products we sell other than passing along anything that may have been provided to us by the manufacturer or other users. If you are in need of further information or guidance, please turn to the manufacturer, FAA Advisory Circulars and guidance materials, the Experimental Aircraft Association, or other reputable sources.