Quick Jump Menu
Info Ask a Question
Advanced Search Search the Knowledgebase
Infinity and Velocity Singles Calibration Mode
Author: Matt Liknaitzky Reference Number: AA-02758 Views: 1018 Created: 2019-02-26 17:48 Last Updated: 2019-02-26 17:48 0 Rating/ Voters

Several Infinity and Velocity Singles have a 'Calibrate' mode that allows you to re-calibrate sensors such as airspeed/altitude and battery current zero.

To enter calibration mode:

1. Press the knob repeatedly DURING startup of the instrument:



2. During startup you will notice the word CALIBRATE appears on the screen, but then the instrument boots as normal:



3. AFTER boot up, enter the regular menu as normal by clicking the Knob:


4. Roll the Knob until you get to the Calibrate menu (not visible in normal mode):


5. Adjust the desired calibrations:


After adjusting calibrations you may exit the menu and operate instrument as usual.



IMPORTANT NOTICE: You must make your own determination if the products sold by MGL Avionics are safe and effective for your intended applications. MGL Avionics makes no representations or warranties as to either the suitability of any of the products we sell as to your particular application or the compatibility of any of the products we sell with other products you may buy from us or anywhere else, and we disclaim any warranties or representations that may otherwise arise by law. Also, we offer no specific advice on how to install any of the products we sell other than passing along anything that may have been provided to us by the manufacturer or other users. If you are in need of further information or guidance, please turn to the manufacturer, FAA Advisory Circulars and guidance materials, the Experimental Aircraft Association, or other reputable sources.