Infinity and Velocity Singles Calibration Mode

AA-02758

Several Infinity and Velocity Singles have a 'Calibrate' mode that allows you to re-calibrate sensors such as airspeed/altitude and battery current zero.

To enter calibration mode:

1. Press the knob repeatedly DURING startup of the instrument:



2. During startup you will notice the word CALIBRATE appears on the screen, but then the instrument boots as normal:



3. AFTER boot up, enter the regular menu as normal by clicking the Knob:


4. Roll the Knob until you get to the Calibrate menu (not visible in normal mode):


5. Adjust the desired calibrations:


After adjusting calibrations you may exit the menu and operate instrument as usual.