iEFIS Challenger and Explorer Weights and Current Draws

AA-00648

Below are the system weights and Current loads of the iEFIS Explorer and Challenger. We recommend putting all EFIS system components on a 5 Amp Circuit Breaker. If radio and transponder are used, these can be placed on another 5 Amp Circuit breaker. If autopilot is used, both servos can share another 5 Amp Circuit Breaker.

 

iEFIS Explorer 8.5"




oz grams
Amps
iEFIS Explorer 8.5" 33.5 951
1.2 Amps
iBox 24.1 685
300mA
SP-7 4.4 124
50mA (Heater Off) and 120 mA (Heater On)
SP-6 4.4 124
50mA (Heater Off) and 120 mA (Heater On)
RDAC XF 12.7 361
80mA
Harnesses (approx) 25 700


oz grams

Total 104.1 2945
Recommend 1 x 5 Amp Circuit Breaker for entire iEFIS system

lbs kg

Total in lbs and kg 6.51 2.95

 

iEFIS Challenger 10.4"




oz grams
Amps
iEFIS Challenger 10.4" 46.9 1330
2.25 Amps @ 100% Backlight, 1.2 Amps @ 75%, 850 mA @ 50%, 450 mA @ min.
iBox 24.1 685
300mA
SP-7 4.4 124
50mA (Heater Off) and 120 mA (Heater On)
SP-6 4.4 124
50mA (Heater Off) and 120 mA (Heater On)
RDAC XF MAP 13.3 377
100 mA
Harnesses (approx) 25 700


oz grams

Total 118.1 3339.65
Recommend 1 x 5 Amp Circuit Breaker for entire iEFIS system

lbs kg

Total in lbs and kg 7.38 3.34